Dehydration-Induced Loss of Corrosion Protection Properties in Chromate Conversion Coatings on Aluminum Alloy 2024-T3

V. Laget, C. S. Jeffcoate, H. S. Isaacs, R. G. Buchheit

Research output: Contribution to journalArticlepeer-review

29 Scopus citations

Abstract

It is well known that chromate conversion coatings (CCCs) exhibit a prompt loss in corrosion resistance when exposed to moderately elevated temperatures (60-100°C). They also suffer a gradual loss in corrosion resistance due to ambient temperature exposure. To better understand the origins of losses in corrosion resistance, CCCs were formed on 99.99% Al, 1100 Al [Al-1.0(Fe, Si, Cu)], and 2024-T3 (Al-4.4Cu-1.5Mg-0.6Mn), exposed to elevated and ambient temperature exposures for various lengths of time, and characterized using several different methods. The Cr(VI):total Cr ratio in CCCs was estimated by analysis of data derived from X-ray absorption spectroscopy. Corrosion resistance was measured by electrochemical impedance spectroscopy. The evolution of shrinkage cracking was examined by environmental scanning electron microscopy. Cr(VI) leaching experiments were also carried out to characterize the effect of thermal exposure on Cr(VI) release. Thermal analysis and X-ray diffraction were conducted to characterize the temperature-dependent changes in CCCs. Results show that CCCs degrade in several distinct steps over the temperature range of 20 to 500°C. Our findings support the longstanding notion that dehydration is the root cause for losses in corrosion resistance due to aging at ambient and low temperatures (<150°C). Extended X-ray fine structure measurements indicate a shortening in Cr(III)-Cr(III) nearest neighbor distances upon dehydration. This is interpreted as a consolidation in the Cr(OH)3 backbone of the CCC which leads to shrinkage cracking and immobilization of Cr(VI). This finding is important because it links older observations of the effects of aging and heating on CCCs to newer interpretations of CCC formation based on inorganic polymerization. Overall, these results reveal CCCs to be highly dynamic coatings with corrosion resistance properties that vary considerably in both the short term and long term.

Original languageEnglish
Pages (from-to)B425-B432
JournalJournal of the Electrochemical Society
Volume150
Issue number9
DOIs
StatePublished - Sep 2003

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Renewable Energy, Sustainability and the Environment
  • Surfaces, Coatings and Films
  • Electrochemistry
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Dehydration-Induced Loss of Corrosion Protection Properties in Chromate Conversion Coatings on Aluminum Alloy 2024-T3'. Together they form a unique fingerprint.

Cite this