TY - GEN
T1 - Experimental methods to determine the constitutive properties of fabric inflatable structures
AU - Turner, Adam W.
AU - Peterson, Michael L.
AU - Davids, William G.
PY - 2006
Y1 - 2006
N2 - In an effort to reduce deployment cost and time, the military is taking a closer look at how to more efficiently deploy and construct their shelters. In support of this effort, one current research topic is lightweight inflatable structures used for maintenance and shelter. While inflatable fabric structures are not new, recent developments have vastly improved the load-carrying capability and durability of these structures, allowing them to replace traditional framed tent structures. This is due in large part to the development of inflated structural members called airbeams, which are essentially pressurized fabric tubes with an impermeable internal bladder. The working pressures of the structural airbeams are upwards of 592 kPa. There are two major types of airbeams; woven and braided. The woven beams generally operate at lower pressures (69-296 kPa), while the more recently developed braided beams operate at much higher pressures (296-592 kPa). Since the technology of airbeams is relatively new, there are few standard material tests for determining the fabric constitutive properties necessary for airbeam design. This represents a significant barrier to their efficient implementation. This paper will present the current state of the art in relevant areas of textile testing and describe test practices useful for identifying the constitutive properties of the airbeam fabrics. In addition, preliminary testing of inflated airbeams will also be presented, and the results discussed.
AB - In an effort to reduce deployment cost and time, the military is taking a closer look at how to more efficiently deploy and construct their shelters. In support of this effort, one current research topic is lightweight inflatable structures used for maintenance and shelter. While inflatable fabric structures are not new, recent developments have vastly improved the load-carrying capability and durability of these structures, allowing them to replace traditional framed tent structures. This is due in large part to the development of inflated structural members called airbeams, which are essentially pressurized fabric tubes with an impermeable internal bladder. The working pressures of the structural airbeams are upwards of 592 kPa. There are two major types of airbeams; woven and braided. The woven beams generally operate at lower pressures (69-296 kPa), while the more recently developed braided beams operate at much higher pressures (296-592 kPa). Since the technology of airbeams is relatively new, there are few standard material tests for determining the fabric constitutive properties necessary for airbeam design. This represents a significant barrier to their efficient implementation. This paper will present the current state of the art in relevant areas of textile testing and describe test practices useful for identifying the constitutive properties of the airbeam fabrics. In addition, preliminary testing of inflated airbeams will also be presented, and the results discussed.
KW - Airbeams
KW - Inflatable fabric structures
KW - Testing methods
UR - http://www.scopus.com/inward/record.url?scp=85196526453&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=85196526453&partnerID=8YFLogxK
M3 - Conference contribution
AN - SCOPUS:85196526453
SN - 0791837904
SN - 9780791837900
T3 - American Society of Mechanical Engineers, Nondestructive Evaluation Engineering Division (Publication) NDE
BT - Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Non-Destructive Evaluation
T2 - 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006
Y2 - 5 November 2006 through 10 November 2006
ER -