In-situ calibrated modeling of residual stresses induced in machining under various cooling and lubricating environments

Research output: Contribution to journalArticlepeer-review

7 Scopus citations


Although many functional characteristics, such as fatigue life and damage resistance depend on residual stresses, there are currently no industrially viable ‘Digital Process Twin’ models (DPTs) capable of efficiently and quickly predicting machining-induced stresses. By leveraging advances in ultra-high-speed in-situ experimental characterization of machining and finishing processes under plane strain (orthogonal/2D) conditions, we have developed a set of physics-based semi-analytical models to predict residual stress evolution in light of the extreme gradients of stress, strain and temperature, which are unique to these thermo-mechanical processes. Initial validation trials of this novel paradigm were carried out in Ti-6Al4V and AISI 4340 alloy steel. A variety dry, cryogenically cooled and oil lubricated conditions were evaluated to determine the model’s ability to capture the tribological changes induced due to lubrication and cooling. The preliminarily calibrated and validated model exhibited an average correlation of better than 20% between the predicted stresses and experimental data, with calculation times of less than a second. Based on such fast-acting DPTs, the authors envision future capabilities in pro-active surface engineering of advanced structural components (e.g., turbine blades).

Original languageEnglish
Article number28
Pages (from-to)1-15
Number of pages15
Issue number3
StatePublished - Mar 2021

Bibliographical note

Funding Information:
Funding: This material is based upon work supported by the U.S. Department of Energy’s Office of Energy Efficiency and Renewable Energy (EERE) under the Advanced Manufacturing Office’s (AMO) DE-FOA-0001980, Award Number DE-EE0009121/0000, project title “AI-Enabled Discovery and Physics Based Optimization of Energy Efficient Processing Strategies for Advanced Turbine Alloys”.

Publisher Copyright:
© 2021 by the author. Licensee MDPI, Basel, Switzerland.


  • Characterization
  • Cryogenic machining
  • Digital process twin
  • Process modeling
  • Tribology

ASJC Scopus subject areas

  • Mechanical Engineering
  • Surfaces, Coatings and Films


Dive into the research topics of 'In-situ calibrated modeling of residual stresses induced in machining under various cooling and lubricating environments'. Together they form a unique fingerprint.

Cite this