In-situ Nanoscale Ablation

Thomas J. Cochell, Raymond R. Unocic, Brody K. Bessire, Savio J. Poovanthingal, Alexandre Martin

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

Abstract

An understanding of the ablation of carbon-based materials is crucial to modeling the behavior of atmospheric entry spacecrafts equipped with thermal protection systems (TPS). Carbon is the backbone of TPS systems such as PICA (phenolic-impregnated carbon ablator). Therefore in the present work we study ablation of highly oriented pyrolytic graphite (HOPG) in oxygen at temperatures up to 1000°C done within a gas reaction cell housed in a scanning transmission electron microscope (STEM). Observation of the HOPG oxidation on specimens sectioned parallel and normal to the carbon basal planes in the presence of oxygen are reported. Pitting caused by residual oxygen and/or platinum particles from the sectioning process was observed before oxygen gas flow was established at 750 °C in the specimen sectioned with the carbon basal planes parallel to the beam direction. Introduction of oxygen flow caused rapid oxidation moving in a uniform front that completely consumed the HOPG in approximately 1.5 minutes. The specimen sectioned with the carbon basal planes normal to the beam direction did not show the same pitting phenomenon but exhibited rapid oxidation at 1000°C that proceeded in a uniform front and completed in approximately 1 minute. All specimens tested had a husk resembling the original specimen shape left over after oxidation. It is concluded that this husk is most likely ash impurity from the HOPG or impurities from the sectioning process or E-chip. A residual gas analyszer (RGA) was successfully used to monitor gas flows during the experiments but was yet unsuccessful in monitoring oxidation gas products produced during the experiment. These in-situ studies successfully show how this highly ordered carbon ablates on a nano- and micro-scopic length scale and can be used to provide fundamental understanding of carbon ablation that can be used to design the next-generation of TPS systems.

Original languageEnglish
Title of host publicationAIAA Aviation Forum and ASCEND, 2024
DOIs
StatePublished - 2024
EventAIAA Aviation Forum and ASCEND, 2024 - Las Vegas, United States
Duration: Jul 29 2024Aug 2 2024

Publication series

NameAIAA Aviation Forum and ASCEND, 2024

Conference

ConferenceAIAA Aviation Forum and ASCEND, 2024
Country/TerritoryUnited States
CityLas Vegas
Period7/29/248/2/24

Bibliographical note

Publisher Copyright:
© 2024, American Institute of Aeronautics and Astronautics Inc, AIAA. All rights reserved.

ASJC Scopus subject areas

  • Energy Engineering and Power Technology
  • Nuclear Energy and Engineering
  • Aerospace Engineering
  • Space and Planetary Science

Fingerprint

Dive into the research topics of 'In-situ Nanoscale Ablation'. Together they form a unique fingerprint.

Cite this