Ir directamente a la navegación principal Ir directamente a la búsqueda Ir directamente al contenido principal

A note on reinforcement of polymer matrix composites using carbon residues derived from woody biomass

  • Malte Pries
  • , Holger Militz
  • , Barry Goodell
  • , Xinfeng Xie
  • , Qian Yuhui Qian
  • , Michael Peterson
  • , Roberto Lopez-Anido

Producción científica: Article › revisión exhaustiva

2 Citas (Scopus)

Resumen

The mechanical properties of phenolic resin reinforced with three different carbon materials were investigated experimentally. The carbon materials: (1) commercially produced carbon nanotubes (CNTs), (2) flash-heated lignocellulose containing CNTs and carbon-black, and (3) cyclically oxidized lignocellulose (Goodell, B. et al. (2008). Journal of Nanoscience and Nanotechnology, 8: 2472-2474) were added to phenolic resin in different weight percentages to fabricate composites. Carbon nanotubes were found to be an effective reinforcing filler increasing tensile strength by 45.34% and Youngs modulus by 19.08% with a 2% loading. The flash-heated material increased Youngs modulus by 11.04% with a 2% loading but did not affect tensile strength. The cyclically heated material did not contain CNTs, their inclusion in the composites reduced Youngs modulus and, for the 1% loading, reduced tensile strength as well.

Idioma originalEnglish
Páginas (desde-hasta)1883-1892
Número de páginas10
PublicaciónJournal of Composite Materials
Volumen44
N.º15
DOI
EstadoPublished - jul 2010

ASJC Scopus subject areas

  • Ceramics and Composites
  • Mechanics of Materials
  • Mechanical Engineering
  • Materials Chemistry

Huella

Profundice en los temas de investigación de 'A note on reinforcement of polymer matrix composites using carbon residues derived from woody biomass'. En conjunto forman una huella única.

Citar esto