A study of boilover in liquid pool fires supported on water. part II: Effects of In-Depth radiation absorption

T. Inamura; K. Saito; K. A. Tagavi

doi:10.1080/00102209208947190

A study of boilover in liquid pool fires supported on water. part II: Effects of In-Depth radiation absorption

T. Inamura
, K. Saito
, K. A. Tagavi

Mechanical and Aerospace Engineering

Producción científica: Article › revisión exhaustiva

65 Citas (Scopus)

Resumen

This study is the continuation of a previous study (Part I) on boilover of liquid fuels supported on water. Previously we designed a small-scale pool-fire apparatus and tested seventeen different (single and multicomponent) liquid fuels on water. Based on this established data, in this paper we describe a one-dimensional model to predict the time required for the water sublayer to start to boil (TWSB). The model includes the unsteady term in the thermal energy equation, along with conduction and in-depth absorption of radiation terms. To fully implement the model, radiation absorption was measured for toluene and Alberta Sweet crude oil as a function of fuel-layer thickness. The model calculation predicts the formation of inverse temperature profiles in the liquid due to the effect of in-depth absorption. Occurrence of the predicted Rayleigh convection in the fuel layer is confirmed using holographic interferometry, and its effect on TWSB is estimated by comparing the model calculations with the experimental results. It is found that a significant amount of heat is transferred from the upper fuel surface to the fuel-water interface by Rayleigh convection, while the heat loss to the walls is found to be moderate.

Idioma original	English
Páginas (desde-hasta)	105-119
Número de páginas	15
Publicación	Combustion Science and Technology
Volumen	86
N.º	1-6
DOI	https://doi.org/10.1080/00102209208947190
Estado	Published - nov 1 1992

Nota bibliográfica

Funding Information:
We wish to express our thanks to D. Evans and D. Gross for technical discussions on their pool fire test results on crude oils, Ed. Tennyson of Mineral Management Service of the U.S. Department of Interior for organizing this research program and T. Yumoto who offered information concerning absorption coefficient measurement. KS wishes to acknowledge valuable comments from F. A. Williams which helped to improve the contents largely. This work was supported in part from the National Institute of Standards and Technology under Grand 60NANB7D0739 and the Center for Robotics and Manufacturing Systems, University of Kentucky, under Grand #204002.

Financiación

We wish to express our thanks to D. Evans and D. Gross for technical discussions on their pool fire test results on crude oils, Ed. Tennyson of Mineral Management Service of the U.S. Department of Interior for organizing this research program and T. Yumoto who offered information concerning absorption coefficient measurement. KS wishes to acknowledge valuable comments from F. A. Williams which helped to improve the contents largely. This work was supported in part from the National Institute of Standards and Technology under Grand 60NANB7D0739 and the Center for Robotics and Manufacturing Systems, University of Kentucky, under Grand #204002.

Financiadores	Número del financiador
Center for Robotics and Manufacturing Systems, University of Kentucky	204002
National Institute of Standards and Technology	60NANB7D0739

ASJC Scopus subject areas

General Chemistry
General Chemical Engineering
Fuel Technology
Energy Engineering and Power Technology
General Physics and Astronomy

Acceder al documento

10.1080/00102209208947190

Otros archivos y enlaces

Link to publication in Scopus

Citar esto

@article{aee6e460fec6499c94f264a55b6da95e,

title = "A study of boilover in liquid pool fires supported on water. part II: Effects of In-Depth radiation absorption",

abstract = "This study is the continuation of a previous study (Part I) on boilover of liquid fuels supported on water. Previously we designed a small-scale pool-fire apparatus and tested seventeen different (single and multicomponent) liquid fuels on water. Based on this established data, in this paper we describe a one-dimensional model to predict the time required for the water sublayer to start to boil (TWSB). The model includes the unsteady term in the thermal energy equation, along with conduction and in-depth absorption of radiation terms. To fully implement the model, radiation absorption was measured for toluene and Alberta Sweet crude oil as a function of fuel-layer thickness. The model calculation predicts the formation of inverse temperature profiles in the liquid due to the effect of in-depth absorption. Occurrence of the predicted Rayleigh convection in the fuel layer is confirmed using holographic interferometry, and its effect on TWSB is estimated by comparing the model calculations with the experimental results. It is found that a significant amount of heat is transferred from the upper fuel surface to the fuel-water interface by Rayleigh convection, while the heat loss to the walls is found to be moderate.",

author = "T. Inamura and K. Saito and Tagavi, \{K. A.\}",

note = "Funding Information: We wish to express our thanks to D. Evans and D. Gross for technical discussions on their pool fire test results on crude oils, Ed. Tennyson of Mineral Management Service of the U.S. Department of Interior for organizing this research program and T. Yumoto who offered information concerning absorption coefficient measurement. KS wishes to acknowledge valuable comments from F. A. Williams which helped to improve the contents largely. This work was supported in part from the National Institute of Standards and Technology under Grand 60NANB7D0739 and the Center for Robotics and Manufacturing Systems, University of Kentucky, under Grand \#204002.",

year = "1992",

month = nov,

day = "1",

doi = "10.1080/00102209208947190",

language = "English",

volume = "86",

pages = "105--119",

number = "1-6",

}

TY - JOUR

T1 - A study of boilover in liquid pool fires supported on water. part II

T2 - Effects of In-Depth radiation absorption

AU - Inamura, T.

AU - Saito, K.

AU - Tagavi, K. A.

N1 - Funding Information: We wish to express our thanks to D. Evans and D. Gross for technical discussions on their pool fire test results on crude oils, Ed. Tennyson of Mineral Management Service of the U.S. Department of Interior for organizing this research program and T. Yumoto who offered information concerning absorption coefficient measurement. KS wishes to acknowledge valuable comments from F. A. Williams which helped to improve the contents largely. This work was supported in part from the National Institute of Standards and Technology under Grand 60NANB7D0739 and the Center for Robotics and Manufacturing Systems, University of Kentucky, under Grand #204002.

PY - 1992/11/1

Y1 - 1992/11/1

N2 - This study is the continuation of a previous study (Part I) on boilover of liquid fuels supported on water. Previously we designed a small-scale pool-fire apparatus and tested seventeen different (single and multicomponent) liquid fuels on water. Based on this established data, in this paper we describe a one-dimensional model to predict the time required for the water sublayer to start to boil (TWSB). The model includes the unsteady term in the thermal energy equation, along with conduction and in-depth absorption of radiation terms. To fully implement the model, radiation absorption was measured for toluene and Alberta Sweet crude oil as a function of fuel-layer thickness. The model calculation predicts the formation of inverse temperature profiles in the liquid due to the effect of in-depth absorption. Occurrence of the predicted Rayleigh convection in the fuel layer is confirmed using holographic interferometry, and its effect on TWSB is estimated by comparing the model calculations with the experimental results. It is found that a significant amount of heat is transferred from the upper fuel surface to the fuel-water interface by Rayleigh convection, while the heat loss to the walls is found to be moderate.

AB - This study is the continuation of a previous study (Part I) on boilover of liquid fuels supported on water. Previously we designed a small-scale pool-fire apparatus and tested seventeen different (single and multicomponent) liquid fuels on water. Based on this established data, in this paper we describe a one-dimensional model to predict the time required for the water sublayer to start to boil (TWSB). The model includes the unsteady term in the thermal energy equation, along with conduction and in-depth absorption of radiation terms. To fully implement the model, radiation absorption was measured for toluene and Alberta Sweet crude oil as a function of fuel-layer thickness. The model calculation predicts the formation of inverse temperature profiles in the liquid due to the effect of in-depth absorption. Occurrence of the predicted Rayleigh convection in the fuel layer is confirmed using holographic interferometry, and its effect on TWSB is estimated by comparing the model calculations with the experimental results. It is found that a significant amount of heat is transferred from the upper fuel surface to the fuel-water interface by Rayleigh convection, while the heat loss to the walls is found to be moderate.

UR - https://www.scopus.com/pages/publications/0027004949

UR - https://www.scopus.com/pages/publications/0027004949#tab=citedBy

U2 - 10.1080/00102209208947190

DO - 10.1080/00102209208947190

M3 - Article

AN - SCOPUS:0027004949

SN - 0010-2202

VL - 86

SP - 105

EP - 119

JO - Combustion Science and Technology

JF - Combustion Science and Technology

IS - 1-6

ER -

A study of boilover in liquid pool fires supported on water. part II: Effects of In-Depth radiation absorption

Resumen

Nota bibliográfica

Financiación

ASJC Scopus subject areas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto