Ir directamente a la navegación principal Ir directamente a la búsqueda Ir directamente al contenido principal

Adsorption of ethoxylated nonionic surfactants from siloxane-based solvent and aqueous systems: Use of QCM and model polymeric surfaces

Producción científica: Article › revisión exhaustiva

1 Cita (Scopus)

Resumen

Adsorption behavior was quantified with pure ethoxylated nonionic surfactants onto different polymeric surfaces (hydrophilic cotton and hydrophobic polyester) and model hydrophilic gold surface. The polymer materials used for the study were characterized using SEM. The role of ethylene oxide group variation in surfactantpolymer interaction was established using pure surfactant with the same alkyl chain length but varying ethoxylate chain lengths. It was observed that surfactant with more ethylene oxide groups per molecule, being more hydrophilic, interacts favorably with cotton in the hydrophobic siloxane solvent environment. The adsorption of the pure surfactants on model gold surface from hydrophobic solvent and water was also established using the quartz crystal microbalance with dissipation monitoring (QCM-D) system. Effect of ethylene oxide chain length and surfactant concentration on the extent of adsorption was quantified. At the gold-water interface, the plateau adsorption for C12 E3 (15.9 × 10-6 mole/m2) is about four times higher than for C12E8. An opposite trend was observed for adsorption of the surfactants on gold in the hydrophobic D5 environment. Information about thickness, adsorption and desorption kinetics, and structure of adsorbed layer was obtained from the QCM-D frequency-dissipation data. The study is an important contribution towards fundamental understanding of applications involving the use of ethoxylated nonionic surfactants.

Idioma originalEnglish
Páginas (desde-hasta)872-889
Número de páginas18
PublicaciónChemical Engineering Communications
Volumen196
N.º7
DOI
EstadoPublished - jul 2009

Nota bibliográfica

Funding Information:
The QCM work was supported by the NSF-EPSCoR program and Center for Nanoscale Science and Engineering (CeNSE). RCTF provided financial support for A. Ladhe. The authors thank John May from ERTL (Environmental Research Training Lab) for the technical support in GC analysis.

Financiación

The QCM work was supported by the NSF-EPSCoR program and Center for Nanoscale Science and Engineering (CeNSE). RCTF provided financial support for A. Ladhe. The authors thank John May from ERTL (Environmental Research Training Lab) for the technical support in GC analysis.

Financiadores
CeNSE
NSF-EPSCoR program and Center for Nanoscale Science and Engineering

    ASJC Scopus subject areas

    • General Chemistry
    • General Chemical Engineering

    Huella

    Profundice en los temas de investigación de 'Adsorption of ethoxylated nonionic surfactants from siloxane-based solvent and aqueous systems: Use of QCM and model polymeric surfaces'. En conjunto forman una huella única.

    Citar esto