Analysis of tool-wear and cutting force components in dry, preheated, and cryogenic machining of NiTi shape memory alloys

Y. Kaynak; H. E. Karaca; R. D. Noebe; I. S. Jawahir

doi:10.1016/j.procir.2013.06.140

Analysis of tool-wear and cutting force components in dry, preheated, and cryogenic machining of NiTi shape memory alloys

Y. Kaynak, H. E. Karaca, R. D. Noebe, I. S. Jawahir

Producción científica: Conference article › revisión exhaustiva

72 Citas (Scopus)

Resumen

The present study focuses on tool-wear behaviour and cutting forces in machining of NiTi shape memory alloys (SMAs) under various machining conditions, namely dry, preheated, and cryogenic cooling at three different cutting speeds. Obtained results show that cryogenic cooling plays a significant role on reducing notch wear at higher cutting speeds in comparison with machining under dry and preheated conditions. It is also found that cryogenic cooling substantially decreases the cutting force requirement compared with machining under dry and preheated conditions. Chip thickness is not significantly affected by machining conditions. Based on these experimental findings, cryogenic machining is considered a promising approach for improving machining performance of NiTi shape memory alloys.

Idioma original	English
Páginas (desde-hasta)	498-503
Número de páginas	6
Publicación	Procedia CIRP
Volumen	8
DOI	https://doi.org/10.1016/j.procir.2013.06.140
Estado	Published - 2013
Evento	14th CIRP Conference on Modeling of Machining Operations, CIRP CMMO 2013 - Turin, Italy Duración: jun 13 2013 → jun 14 2013

Nota bibliográfica

Funding Information:
Authors acknowledge support from the NASA FAP Aeronautical Sciences Project and the NASA EPSCOR Program under Grant No NNX11AQ31A. Authors sincerely thank Mr. Charles Arvin for his help with machining experiments.

Financiación

Authors acknowledge support from the NASA FAP Aeronautical Sciences Project and the NASA EPSCOR Program under Grant No NNX11AQ31A. Authors sincerely thank Mr. Charles Arvin for his help with machining experiments.

Financiadores	Número del financiador
National Aeronautics and Space Administration	NNX11AQ31A

ASJC Scopus subject areas

Control and Systems Engineering
Industrial and Manufacturing Engineering

Acceder al documento

10.1016/j.procir.2013.06.140

Otros archivos y enlaces

Citar esto

@article{1f97e1bef1a94c1fb592bf9a7b417e77,

title = "Analysis of tool-wear and cutting force components in dry, preheated, and cryogenic machining of NiTi shape memory alloys",

abstract = "The present study focuses on tool-wear behaviour and cutting forces in machining of NiTi shape memory alloys (SMAs) under various machining conditions, namely dry, preheated, and cryogenic cooling at three different cutting speeds. Obtained results show that cryogenic cooling plays a significant role on reducing notch wear at higher cutting speeds in comparison with machining under dry and preheated conditions. It is also found that cryogenic cooling substantially decreases the cutting force requirement compared with machining under dry and preheated conditions. Chip thickness is not significantly affected by machining conditions. Based on these experimental findings, cryogenic machining is considered a promising approach for improving machining performance of NiTi shape memory alloys.",

keywords = "Cryogenic machining, NiTi shape memory alloys, Phase transformation, Tool-wear",

author = "Y. Kaynak and Karaca, \{H. E.\} and Noebe, \{R. D.\} and Jawahir, \{I. S.\}",

note = "Funding Information: Authors acknowledge support from the NASA FAP Aeronautical Sciences Project and the NASA EPSCOR Program under Grant No NNX11AQ31A. Authors sincerely thank Mr. Charles Arvin for his help with machining experiments.; 14th CIRP Conference on Modeling of Machining Operations, CIRP CMMO 2013 ; Conference date: 13-06-2013 Through 14-06-2013",

year = "2013",

doi = "10.1016/j.procir.2013.06.140",

language = "English",

volume = "8",

pages = "498--503",

}

TY - JOUR

T1 - Analysis of tool-wear and cutting force components in dry, preheated, and cryogenic machining of NiTi shape memory alloys

AU - Kaynak, Y.

AU - Karaca, H. E.

AU - Noebe, R. D.

AU - Jawahir, I. S.

N1 - Funding Information: Authors acknowledge support from the NASA FAP Aeronautical Sciences Project and the NASA EPSCOR Program under Grant No NNX11AQ31A. Authors sincerely thank Mr. Charles Arvin for his help with machining experiments.

PY - 2013

Y1 - 2013

N2 - The present study focuses on tool-wear behaviour and cutting forces in machining of NiTi shape memory alloys (SMAs) under various machining conditions, namely dry, preheated, and cryogenic cooling at three different cutting speeds. Obtained results show that cryogenic cooling plays a significant role on reducing notch wear at higher cutting speeds in comparison with machining under dry and preheated conditions. It is also found that cryogenic cooling substantially decreases the cutting force requirement compared with machining under dry and preheated conditions. Chip thickness is not significantly affected by machining conditions. Based on these experimental findings, cryogenic machining is considered a promising approach for improving machining performance of NiTi shape memory alloys.

AB - The present study focuses on tool-wear behaviour and cutting forces in machining of NiTi shape memory alloys (SMAs) under various machining conditions, namely dry, preheated, and cryogenic cooling at three different cutting speeds. Obtained results show that cryogenic cooling plays a significant role on reducing notch wear at higher cutting speeds in comparison with machining under dry and preheated conditions. It is also found that cryogenic cooling substantially decreases the cutting force requirement compared with machining under dry and preheated conditions. Chip thickness is not significantly affected by machining conditions. Based on these experimental findings, cryogenic machining is considered a promising approach for improving machining performance of NiTi shape memory alloys.

KW - Cryogenic machining

KW - NiTi shape memory alloys

KW - Phase transformation

KW - Tool-wear

UR - http://www.scopus.com/inward/record.url?scp=84881158704&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84881158704&partnerID=8YFLogxK

U2 - 10.1016/j.procir.2013.06.140

DO - 10.1016/j.procir.2013.06.140

M3 - Conference article

AN - SCOPUS:84881158704

SN - 2212-8271

VL - 8

SP - 498

EP - 503

JO - Procedia CIRP

JF - Procedia CIRP

T2 - 14th CIRP Conference on Modeling of Machining Operations, CIRP CMMO 2013

Y2 - 13 June 2013 through 14 June 2013

ER -

Analysis of tool-wear and cutting force components in dry, preheated, and cryogenic machining of NiTi shape memory alloys

Resumen

Nota bibliográfica

Financiación

ASJC Scopus subject areas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto