Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti + Mo composite interlayer

Rui Pan; Sasa Kovacevic; Tiesong Lin; Peng He; Dusan P. Sekulic; Sinisa Dj Mesarovic; Zhihua Yang; Yanxu Shen; Hongmei Wei

doi:10.1016/j.matdes.2016.03.072

Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti + Mo composite interlayer

Rui Pan
, Sasa Kovacevic
, Tiesong Lin
, Peng He
, Dusan P. Sekulic
, Sinisa Dj Mesarovic
, Zhihua Yang
, Yanxu Shen
, Hongmei Wei

Producción científica: Article › revisión exhaustiva

43 Citas (Scopus)

Resumen

2Si-B-3C-N ceramic was successfully vacuum brazed to Nb. Brazing was executed at 850 °C for 10 min using Ag-Cu-Ti/Mo/Ag-Cu-Ti composite interlayer. Effects of the Mo interlayer thickness within the composite interlayer on the microstructure of the joint and its shear strength were investigated. In joints brazed without Mo and with 50 μm Mo interlayer a continuous through cracks propagated within the ceramic during cooling. However, no cracks were found in joints when Mo interlayers thicker than 100 μm were used. The improvement of the shear strength with an increase in the thickness of Mo interlayer within the composite interlayer was achieved. To explain the effects of the Mo layer thickness, detailed FEM simulations of the cooling process were performed. The analysis of the residual stress is consistent with the observed joint strengthening and crack propagation.

Idioma original	English
Páginas (desde-hasta)	193-200
Número de páginas	8
Publicación	Materials and Design
Volumen	99
DOI	https://doi.org/10.1016/j.matdes.2016.03.072
Estado	Published - jun 5 2016

Nota bibliográfica

Publisher Copyright:
© 2016 Elsevier Ltd.

Financiación

The authors gratefully acknowledge the financial support from “ National Natural Science Foundation of China (NSFC, grant numbers 51305102 and 51475103 and 51321061 )” and “ The Funds for Distinguished Young Scientists of Heilongjiang Province (grant number JC2015011 )”. One of the authors (DPS) acknowledges a support through the 1000 Foreign Expert Distinguished Professor Plan. The lead author (RP) acknowledges the support from the Chinese Scholarship Council for visiting positions at the MIT and the University of Kentucky. The work of USA team members has been funded in part by the US National Science Foundation through the grants US NSF Grant CBET # 1234581 and US NSF Grant CBET # 1235759 .

Financiadores	Número del financiador
Funds for Distinguished Young Scientists of Heilongjiang Province	JC2015011
National Science Foundation Arctic Social Science Program	CBET # 1235759, CBET # 1234581
University of Kentucky
National Natural Science Foundation of China (NSFC)	51305102, 51475103, 51321061

ASJC Scopus subject areas

General Materials Science
Mechanics of Materials
Mechanical Engineering

Acceder al documento

10.1016/j.matdes.2016.03.072

Otros archivos y enlaces

Citar esto

@article{82a73a36e35744a6b7e1371fda9280aa,

title = "Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti + Mo composite interlayer",

abstract = "2Si-B-3C-N ceramic was successfully vacuum brazed to Nb. Brazing was executed at 850 °C for 10 min using Ag-Cu-Ti/Mo/Ag-Cu-Ti composite interlayer. Effects of the Mo interlayer thickness within the composite interlayer on the microstructure of the joint and its shear strength were investigated. In joints brazed without Mo and with 50 μm Mo interlayer a continuous through cracks propagated within the ceramic during cooling. However, no cracks were found in joints when Mo interlayers thicker than 100 μm were used. The improvement of the shear strength with an increase in the thickness of Mo interlayer within the composite interlayer was achieved. To explain the effects of the Mo layer thickness, detailed FEM simulations of the cooling process were performed. The analysis of the residual stress is consistent with the observed joint strengthening and crack propagation.",

keywords = "Brazing, Composite interlayer, Mo, Residual stress, Si-B-C-N ceramic",

author = "Rui Pan and Sasa Kovacevic and Tiesong Lin and Peng He and Sekulic, \{Dusan P.\} and Mesarovic, \{Sinisa Dj\} and Zhihua Yang and Yanxu Shen and Hongmei Wei",

note = "Publisher Copyright: {\textcopyright} 2016 Elsevier Ltd.",

year = "2016",

month = jun,

day = "5",

doi = "10.1016/j.matdes.2016.03.072",

language = "English",

volume = "99",

pages = "193--200",

}

TY - JOUR

T1 - Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti + Mo composite interlayer

AU - Pan, Rui

AU - Kovacevic, Sasa

AU - Lin, Tiesong

AU - He, Peng

AU - Sekulic, Dusan P.

AU - Mesarovic, Sinisa Dj

AU - Yang, Zhihua

AU - Shen, Yanxu

AU - Wei, Hongmei

PY - 2016/6/5

Y1 - 2016/6/5

N2 - 2Si-B-3C-N ceramic was successfully vacuum brazed to Nb. Brazing was executed at 850 °C for 10 min using Ag-Cu-Ti/Mo/Ag-Cu-Ti composite interlayer. Effects of the Mo interlayer thickness within the composite interlayer on the microstructure of the joint and its shear strength were investigated. In joints brazed without Mo and with 50 μm Mo interlayer a continuous through cracks propagated within the ceramic during cooling. However, no cracks were found in joints when Mo interlayers thicker than 100 μm were used. The improvement of the shear strength with an increase in the thickness of Mo interlayer within the composite interlayer was achieved. To explain the effects of the Mo layer thickness, detailed FEM simulations of the cooling process were performed. The analysis of the residual stress is consistent with the observed joint strengthening and crack propagation.

AB - 2Si-B-3C-N ceramic was successfully vacuum brazed to Nb. Brazing was executed at 850 °C for 10 min using Ag-Cu-Ti/Mo/Ag-Cu-Ti composite interlayer. Effects of the Mo interlayer thickness within the composite interlayer on the microstructure of the joint and its shear strength were investigated. In joints brazed without Mo and with 50 μm Mo interlayer a continuous through cracks propagated within the ceramic during cooling. However, no cracks were found in joints when Mo interlayers thicker than 100 μm were used. The improvement of the shear strength with an increase in the thickness of Mo interlayer within the composite interlayer was achieved. To explain the effects of the Mo layer thickness, detailed FEM simulations of the cooling process were performed. The analysis of the residual stress is consistent with the observed joint strengthening and crack propagation.

KW - Brazing

KW - Composite interlayer

KW - Mo

KW - Residual stress

KW - Si-B-C-N ceramic

UR - https://www.scopus.com/pages/publications/84962858089

UR - https://www.scopus.com/pages/publications/84962858089#tab=citedBy

U2 - 10.1016/j.matdes.2016.03.072

DO - 10.1016/j.matdes.2016.03.072

M3 - Article

AN - SCOPUS:84962858089

SN - 0264-1275

VL - 99

SP - 193

EP - 200

JO - Materials and Design

JF - Materials and Design

ER -

Control of residual stresses in 2Si-B-3C-N and Nb joints by the Ag-Cu-Ti + Mo composite interlayer

Resumen

Nota bibliográfica

Financiación

ASJC Scopus subject areas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto