Detrimental effects of capacitance on high-resistance-grounded mine distribution systems

Joseph Sottile; Steve J. Gnapragasam; Thomas Novak; Jeffrey L. Kohler

doi:10.1109/TIA.2006.880844

Detrimental effects of capacitance on high-resistance-grounded mine distribution systems

Joseph Sottile
, Steve J. Gnapragasam
, Thomas Novak
, Jeffrey L. Kohler

Producción científica: Article › revisión exhaustiva

10 Citas (Scopus)

Resumen

Modern underground coal mines can be very large, having a total connected load in excess of 15 000 hp. These mines generally have many miles of high-power conveyor belts and 15 or more miles of high-voltage power cables at distribution voltages of 12.47, 13.2, 13.8, or 14.4 kV. The shielded cables used in mine power distribution systems have a significant level of capacitance, on the order of 110 pF/ft. This level of capacitance, in an extensive power distribution system at today's voltage levels, can cause significant charging currents during a ground fault. This paper addresses the potential detrimental effects of capacitance charging currents during line-to-ground faults in mine power distribution systems. A representative mine power system is modeled, and simulations with faults at various locations are conducted to evaluate the effects of this capacitance on the level of fault current and relay selectivity. This paper also includes results of capacitance measurements made on mine power feeder cables used to validate the simulation model.

Idioma original	English
Páginas (desde-hasta)	1333-1339
Número de páginas	7
Publicación	IEEE Transactions on Industry Applications
Volumen	42
N.º	5
DOI	https://doi.org/10.1109/TIA.2006.880844
Estado	Published - sept 2006

Nota bibliográfica

Funding Information:
Paper PID-06-03, presented at the 2005 Industry Applications Society Annual Meeting, Hong Kong, October 2–6, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Mining Industry Committee of the IEEE Industry Applications Society. Manuscript submitted for review October 15, 2005 and released for publication June 3, 2006. This work was supported by the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh Research Laboratory, under Contract 200-2002-000589, Reduction of Mining Electrical Hazards Through Improved Engineering Controls, with Dr. J. L. Kohler as the Technical Project Officer.

Financiación

Paper PID-06-03, presented at the 2005 Industry Applications Society Annual Meeting, Hong Kong, October 2–6, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Mining Industry Committee of the IEEE Industry Applications Society. Manuscript submitted for review October 15, 2005 and released for publication June 3, 2006. This work was supported by the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh Research Laboratory, under Contract 200-2002-000589, Reduction of Mining Electrical Hazards Through Improved Engineering Controls, with Dr. J. L. Kohler as the Technical Project Officer.

Financiadores	Número del financiador
Pittsburgh Research Laboratory	200-2002-000589
National Institute for Occupational Safety and Health

ASJC Scopus subject areas

Control and Systems Engineering
Industrial and Manufacturing Engineering
Electrical and Electronic Engineering

Acceder al documento

10.1109/TIA.2006.880844

Otros archivos y enlaces

Citar esto

@article{9fe63bfa21ae48f2b8c5f6dce58a4228,

title = "Detrimental effects of capacitance on high-resistance-grounded mine distribution systems",

abstract = "Modern underground coal mines can be very large, having a total connected load in excess of 15 000 hp. These mines generally have many miles of high-power conveyor belts and 15 or more miles of high-voltage power cables at distribution voltages of 12.47, 13.2, 13.8, or 14.4 kV. The shielded cables used in mine power distribution systems have a significant level of capacitance, on the order of 110 pF/ft. This level of capacitance, in an extensive power distribution system at today's voltage levels, can cause significant charging currents during a ground fault. This paper addresses the potential detrimental effects of capacitance charging currents during line-to-ground faults in mine power distribution systems. A representative mine power system is modeled, and simulations with faults at various locations are conducted to evaluate the effects of this capacitance on the level of fault current and relay selectivity. This paper also includes results of capacitance measurements made on mine power feeder cables used to validate the simulation model.",

keywords = "Charging current, Ground fault",

author = "Joseph Sottile and Gnapragasam, \{Steve J.\} and Thomas Novak and Kohler, \{Jeffrey L.\}",

note = "Funding Information: Paper PID-06-03, presented at the 2005 Industry Applications Society Annual Meeting, Hong Kong, October 2{\textendash}6, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Mining Industry Committee of the IEEE Industry Applications Society. Manuscript submitted for review October 15, 2005 and released for publication June 3, 2006. This work was supported by the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh Research Laboratory, under Contract 200-2002-000589, Reduction of Mining Electrical Hazards Through Improved Engineering Controls, with Dr. J. L. Kohler as the Technical Project Officer.",

year = "2006",

month = sep,

doi = "10.1109/TIA.2006.880844",

language = "English",

volume = "42",

pages = "1333--1339",

number = "5",

}

TY - JOUR

T1 - Detrimental effects of capacitance on high-resistance-grounded mine distribution systems

AU - Sottile, Joseph

AU - Gnapragasam, Steve J.

AU - Novak, Thomas

AU - Kohler, Jeffrey L.

N1 - Funding Information: Paper PID-06-03, presented at the 2005 Industry Applications Society Annual Meeting, Hong Kong, October 2–6, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Mining Industry Committee of the IEEE Industry Applications Society. Manuscript submitted for review October 15, 2005 and released for publication June 3, 2006. This work was supported by the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh Research Laboratory, under Contract 200-2002-000589, Reduction of Mining Electrical Hazards Through Improved Engineering Controls, with Dr. J. L. Kohler as the Technical Project Officer.

PY - 2006/9

Y1 - 2006/9

N2 - Modern underground coal mines can be very large, having a total connected load in excess of 15 000 hp. These mines generally have many miles of high-power conveyor belts and 15 or more miles of high-voltage power cables at distribution voltages of 12.47, 13.2, 13.8, or 14.4 kV. The shielded cables used in mine power distribution systems have a significant level of capacitance, on the order of 110 pF/ft. This level of capacitance, in an extensive power distribution system at today's voltage levels, can cause significant charging currents during a ground fault. This paper addresses the potential detrimental effects of capacitance charging currents during line-to-ground faults in mine power distribution systems. A representative mine power system is modeled, and simulations with faults at various locations are conducted to evaluate the effects of this capacitance on the level of fault current and relay selectivity. This paper also includes results of capacitance measurements made on mine power feeder cables used to validate the simulation model.

AB - Modern underground coal mines can be very large, having a total connected load in excess of 15 000 hp. These mines generally have many miles of high-power conveyor belts and 15 or more miles of high-voltage power cables at distribution voltages of 12.47, 13.2, 13.8, or 14.4 kV. The shielded cables used in mine power distribution systems have a significant level of capacitance, on the order of 110 pF/ft. This level of capacitance, in an extensive power distribution system at today's voltage levels, can cause significant charging currents during a ground fault. This paper addresses the potential detrimental effects of capacitance charging currents during line-to-ground faults in mine power distribution systems. A representative mine power system is modeled, and simulations with faults at various locations are conducted to evaluate the effects of this capacitance on the level of fault current and relay selectivity. This paper also includes results of capacitance measurements made on mine power feeder cables used to validate the simulation model.

KW - Charging current

KW - Ground fault

UR - https://www.scopus.com/pages/publications/33749414564

UR - https://www.scopus.com/pages/publications/33749414564#tab=citedBy

U2 - 10.1109/TIA.2006.880844

DO - 10.1109/TIA.2006.880844

M3 - Article

AN - SCOPUS:33749414564

SN - 0093-9994

VL - 42

SP - 1333

EP - 1339

JO - IEEE Transactions on Industry Applications

JF - IEEE Transactions on Industry Applications

IS - 5

ER -

Detrimental effects of capacitance on high-resistance-grounded mine distribution systems

Resumen

Nota bibliográfica

Financiación

ASJC Scopus subject areas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto