Effect of the heat treatment on the cube recrystallization texture of Al-Mn-Mg aluminum alloy

Wenchang Liu; Min Ma; Fuqian Yang

doi:10.1007/s11661-012-1601-y

Effect of the heat treatment on the cube recrystallization texture of Al-Mn-Mg aluminum alloy

Wenchang Liu
, Min Ma
, Fuqian Yang

Producción científica: Article › revisión exhaustiva

13 Citas (Scopus)

Resumen

The evolution of the recrystallized structure and texture of a cold-rolled Al-Mn-Mg alloy with different heat treatments was studied. The alloy with dual-heat treatments at 872 K and 644 K (599 C and 371 C) exhibited fast recrystallization and had coarser recrystallized grains and stronger cube texture than the alloy with single-heat treatment at 872 K (599 C). The differences in microstructures and textures were attributed to the precipitation state. Large particles formed during annealing at 872 K (599 C) played a randomizing effect on the total recrystallization texture, while smaller particles formed during annealing at 644 K (371 C) not only enhanced recrystallization of the cold-rolled sheets, but also caused formation of coarse, recrystallized grains with a strong cube texture. The evolution of the coarse grains was due to nucleation of cube-oriented grains.

Idioma original	English
Páginas (desde-hasta)	2857-2868
Número de páginas	12
Publicación	Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
Volumen	44
N.º	6
DOI	https://doi.org/10.1007/s11661-012-1601-y
Estado	Published - jun 2013

Nota bibliográfica

Funding Information:
This study was supported by the National Natural Science Foundation of China (Grant No. 51271159), and the Natural Science Foundation of Hebei province of China (Grant No. E2011203164).

Financiación

This study was supported by the National Natural Science Foundation of China (Grant No. 51271159), and the Natural Science Foundation of Hebei province of China (Grant No. E2011203164).

Financiadores	Número del financiador
National Natural Science Foundation of China (NSFC)	51271159
Natural Science Foundation of Hebei Province	E2011203164

ASJC Scopus subject areas

Condensed Matter Physics
Mechanics of Materials
Metals and Alloys

Acceder al documento

10.1007/s11661-012-1601-y

Otros archivos y enlaces

Citar esto

@article{b1d194b7697e4e1caa0e955e798ca179,

title = "Effect of the heat treatment on the cube recrystallization texture of Al-Mn-Mg aluminum alloy",

abstract = "The evolution of the recrystallized structure and texture of a cold-rolled Al-Mn-Mg alloy with different heat treatments was studied. The alloy with dual-heat treatments at 872 K and 644 K (599 C and 371 C) exhibited fast recrystallization and had coarser recrystallized grains and stronger cube texture than the alloy with single-heat treatment at 872 K (599 C). The differences in microstructures and textures were attributed to the precipitation state. Large particles formed during annealing at 872 K (599 C) played a randomizing effect on the total recrystallization texture, while smaller particles formed during annealing at 644 K (371 C) not only enhanced recrystallization of the cold-rolled sheets, but also caused formation of coarse, recrystallized grains with a strong cube texture. The evolution of the coarse grains was due to nucleation of cube-oriented grains.",

author = "Wenchang Liu and Min Ma and Fuqian Yang",

note = "Funding Information: This study was supported by the National Natural Science Foundation of China (Grant No. 51271159), and the Natural Science Foundation of Hebei province of China (Grant No. E2011203164).",

year = "2013",

month = jun,

doi = "10.1007/s11661-012-1601-y",

language = "English",

volume = "44",

pages = "2857--2868",

number = "6",

}

TY - JOUR

T1 - Effect of the heat treatment on the cube recrystallization texture of Al-Mn-Mg aluminum alloy

AU - Liu, Wenchang

AU - Ma, Min

AU - Yang, Fuqian

N1 - Funding Information: This study was supported by the National Natural Science Foundation of China (Grant No. 51271159), and the Natural Science Foundation of Hebei province of China (Grant No. E2011203164).

PY - 2013/6

Y1 - 2013/6

N2 - The evolution of the recrystallized structure and texture of a cold-rolled Al-Mn-Mg alloy with different heat treatments was studied. The alloy with dual-heat treatments at 872 K and 644 K (599 C and 371 C) exhibited fast recrystallization and had coarser recrystallized grains and stronger cube texture than the alloy with single-heat treatment at 872 K (599 C). The differences in microstructures and textures were attributed to the precipitation state. Large particles formed during annealing at 872 K (599 C) played a randomizing effect on the total recrystallization texture, while smaller particles formed during annealing at 644 K (371 C) not only enhanced recrystallization of the cold-rolled sheets, but also caused formation of coarse, recrystallized grains with a strong cube texture. The evolution of the coarse grains was due to nucleation of cube-oriented grains.

AB - The evolution of the recrystallized structure and texture of a cold-rolled Al-Mn-Mg alloy with different heat treatments was studied. The alloy with dual-heat treatments at 872 K and 644 K (599 C and 371 C) exhibited fast recrystallization and had coarser recrystallized grains and stronger cube texture than the alloy with single-heat treatment at 872 K (599 C). The differences in microstructures and textures were attributed to the precipitation state. Large particles formed during annealing at 872 K (599 C) played a randomizing effect on the total recrystallization texture, while smaller particles formed during annealing at 644 K (371 C) not only enhanced recrystallization of the cold-rolled sheets, but also caused formation of coarse, recrystallized grains with a strong cube texture. The evolution of the coarse grains was due to nucleation of cube-oriented grains.

UR - https://www.scopus.com/pages/publications/84877061006

UR - https://www.scopus.com/pages/publications/84877061006#tab=citedBy

U2 - 10.1007/s11661-012-1601-y

DO - 10.1007/s11661-012-1601-y

M3 - Article

AN - SCOPUS:84877061006

SN - 1073-5623

VL - 44

SP - 2857

EP - 2868

JO - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

JF - Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

IS - 6

ER -

Effect of the heat treatment on the cube recrystallization texture of Al-Mn-Mg aluminum alloy

Resumen

Nota bibliográfica

Financiación

ASJC Scopus subject areas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto