Ir directamente a la navegación principal Ir directamente a la búsqueda Ir directamente al contenido principal

Estimation of trunk mechanical properties using system identification: Effects of experimental setup and modelling assumptions

  • Babak Bazrgari
  • , Maury A. Nussbaum
  • , Michael L. Madigan

Producción científica: Article › revisión exhaustiva

14 Citas (Scopus)

Resumen

The use of system identification to quantify trunk mechanical properties is growing in biomechanics research. The effects of several experimental and modelling factors involved in the system identification of trunk mechanical properties were investigated. Trunk kinematics and kinetics were measured in six individuals when exposed to sudden trunk perturbations. Effects of motion sensor positioning and properties of elements between the perturbing device and the trunk were investigated by adopting different models for system identification. Results showed that by measuring trunk kinematics at a location other than the trunk surface, the deformation of soft tissues is erroneously included into trunk kinematics and results in the trunk being predicted as a more damped structure. Results also showed that including elements between the trunk and the perturbing device in the system identification model did not substantially alter model predictions. Other important parameters that were found to substantially affect predictions were the cut-off frequency used when low-pass filtering raw data and the data window length used to estimate trunk properties.

Idioma originalEnglish
Páginas (desde-hasta)1001-1009
Número de páginas9
PublicaciónComputer Methods in Biomechanics and Biomedical Engineering
Volumen15
N.º9
DOI
EstadoPublished - sept 2012

Nota bibliográfica

Funding Information:
This work was supported with Cooperative Agreement Number R01OH008504 by the Centers for Disease Control and Prevention (CDC). Its contents are solely the responsibility of the authors and do not necessarily represent the official views of the CDC. The authors dedicate this work to the memory of Dr Kevin P. Granata whose original ideas formed the foundation of the current investigation. The authors would also like to thank K. Muslim, B. Hendershot and N. Toosizadeh for their assistance in data collection, and R. Waldron and W. Vest for their efforts in building the equipment used during the experiment.

Financiación

This work was supported with Cooperative Agreement Number R01OH008504 by the Centers for Disease Control and Prevention (CDC). Its contents are solely the responsibility of the authors and do not necessarily represent the official views of the CDC. The authors dedicate this work to the memory of Dr Kevin P. Granata whose original ideas formed the foundation of the current investigation. The authors would also like to thank K. Muslim, B. Hendershot and N. Toosizadeh for their assistance in data collection, and R. Waldron and W. Vest for their efforts in building the equipment used during the experiment.

FinanciadoresNúmero del financiador
National Institutes of Health (NIH)R01OH008504
Centers for Disease Control and Prevention

    ASJC Scopus subject areas

    • Bioengineering
    • Biomedical Engineering
    • Human-Computer Interaction
    • Computer Science Applications

    Huella

    Profundice en los temas de investigación de 'Estimation of trunk mechanical properties using system identification: Effects of experimental setup and modelling assumptions'. En conjunto forman una huella única.

    Citar esto