Finite element modeling of residual stresses in machining induced by cutting using a tool with finite edge radius

A thermal elastic-viscoplastic finite element model is used to evaluate the residual stresses remaining in a machined component. An improvement in the accuracy of the predicted residual stresses is obtained by: (a) using a modified Johnson-Cook material model that is augmented by a linearly elastic component to describe the material behavior as non-Newtonian fluid; (b) using a remeshing scheme to simulate the material flow in the vicinity of the rounded cutting tool edge without the use of a separation criterion; (c) properly accounting for the unloading path, and (d) considering the thermomechanical coupling effect on deformation. Case studies are performed to study the influence of sequential cuts, cutting conditions, etc., on the residual stresses induced by orthogonal machining.