Influence of advective heat flux on extinction scalar dissipation rate and velocity in negative edge flames

A counterflow flame geometry, which has previously been experimentally shown to produce stable negative edge flames, was studied using numerical simulations. In this geometry, the flame edge is formed off the counterflow centreline owing to a local increase in scalar dissipation rate. Hot products from the stable nonpremixed flame on the centreline flow through the edge at velocities of ∼1-5 m/s. The size of the counterflow burner and the gas flowrates are varied in the simulations to alter the flame strength and velocity at the flame edge. The advection of products through the edge is shown to extend the flame extinction to higher scalar dissipation rates than required for centreline extinction. For high velocities, the scalar dissipation rate required for flame extinction can be related to the centreline extinction value by considering only the effect of energy addition to the flame edge via advection. However, for lower edge flame velocities, the effects of increased thermal and species diffusion through the edge must also be included. Since the advection at the edge is a product of both the local velocity and temperature gradient, a single correlation between the scalar dissipation rate and the negative edge flame velocity does not exist.