Resumen
By using the finite element code ABAQUS for large deformation, the behavior of a thin disk clamped at the circumference and loaded at the center by a rigid flat-end cylindrical punch was studied. The contact between the punch and the disk is assumed frictionless. The load/displacement relation is compared with analytical results for a point load and they seem to differ by a constant factor for large deformation. This factor depends on the size of the punch and the internal stress in the disk.
| Idioma original | English |
|---|---|
| Páginas (desde-hasta) | 15-22 |
| Número de páginas | 8 |
| Publicación | Mechanics of Materials |
| Volumen | 26 |
| N.º | 1 |
| DOI | |
| Estado | Published - 1997 |
Nota bibliográfica
Funding Information:This work was supported by NSF through DMR9221326 and DMR9623808 with a REU supplement (Emily Hackou), all monitored by Dr. Bruce MacDonald.
Financiación
This work was supported by NSF through DMR9221326 and DMR9623808 with a REU supplement (Emily Hackou), all monitored by Dr. Bruce MacDonald.
| Financiadores | Número del financiador |
|---|---|
| Emily Hackou | |
| National Science Foundation (NSF) | DMR9623808, DMR9221326 |
ASJC Scopus subject areas
- Mechanics of Materials
- Instrumentation
- General Materials Science
Huella
Profundice en los temas de investigación de 'Large deformation of a thin disk by a cylindrical punch'. En conjunto forman una huella única.Citar esto
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver