Neurofuzzy model-based predictive control of weld fusion zone geometry

Yu M. Zhang; Radovan Kovacevic

doi:10.1109/91.705507

Neurofuzzy model-based predictive control of weld fusion zone geometry

Yu M. Zhang
, Radovan Kovacevic

Producción científica: Article › revisión exhaustiva

79 Citas (Scopus)

Resumen

A closed-loop system is developed to control the weld fusion, which is specified by the top-side and back-side bead widths of the weld pool. Because in many applications only a top-side sensor is allowed, which is attached to and moves with the welding torch, an image processing algorithm and neurofuzzy model have been incorporated to measure and estimate the top-side and back-side bead widths based on an advanced top-side vision sensor. The welding current and speed are selected as the control variables. It is found that the correlation between any output and input depends on the value of another input. This cross coupling implies that a nonlinearity exists in the process being controlled. A neurofuzzy model is used to model this nonlinear dynamic process. Based on the dynamic fuzzy model, a predictive control system has been developed to control the welding process. Experiments confirmed that the developed control system is effective in achieving the desired fusion state despite the different disturbances.

Idioma original	English
Páginas (desde-hasta)	389-401
Número de páginas	13
Publicación	IEEE Transactions on Fuzzy Systems
Volumen	6
N.º	3
DOI	https://doi.org/10.1109/91.705507
Estado	Published - 1998

Nota bibliográfica

Funding Information:
Manuscript received July 26, 1996; revised October 28, 1997. This work was supported by the National Science Foundation under Contract DMI-9634735, the Allison Engine Company, Indianapolis, IN, and the Center for Robotics and Manufacturing Systems, University of Kentucky, Lexington, KY.

Financiación

Manuscript received July 26, 1996; revised October 28, 1997. This work was supported by the National Science Foundation under Contract DMI-9634735, the Allison Engine Company, Indianapolis, IN, and the Center for Robotics and Manufacturing Systems, University of Kentucky, Lexington, KY.

Financiadores	Número del financiador
Allison Engine Company
Center for Robotics and Manufacturing Systems
U.S. Department of Energy Chinese Academy of Sciences Guangzhou Municipal Science and Technology Project Oak Ridge National Laboratory Extreme Science and Engineering Discovery Environment National Science Foundation National Energy Research Scientific Computing Center National Natural Science Foundation of China	DMI-9634735
U.S. Department of Energy Chinese Academy of Sciences Guangzhou Municipal Science and Technology Project Oak Ridge National Laboratory Extreme Science and Engineering Discovery Environment National Science Foundation National Energy Research Scientific Computing Center National Natural Science Foundation of China

ASJC Scopus subject areas

Control and Systems Engineering
Computational Theory and Mathematics
Artificial Intelligence
Applied Mathematics

Acceder al documento

10.1109/91.705507

Otros archivos y enlaces

Citar esto

@article{aab1bb0c34c24621a65352eed27a3262,

title = "Neurofuzzy model-based predictive control of weld fusion zone geometry",

abstract = "A closed-loop system is developed to control the weld fusion, which is specified by the top-side and back-side bead widths of the weld pool. Because in many applications only a top-side sensor is allowed, which is attached to and moves with the welding torch, an image processing algorithm and neurofuzzy model have been incorporated to measure and estimate the top-side and back-side bead widths based on an advanced top-side vision sensor. The welding current and speed are selected as the control variables. It is found that the correlation between any output and input depends on the value of another input. This cross coupling implies that a nonlinearity exists in the process being controlled. A neurofuzzy model is used to model this nonlinear dynamic process. Based on the dynamic fuzzy model, a predictive control system has been developed to control the welding process. Experiments confirmed that the developed control system is effective in achieving the desired fusion state despite the different disturbances.",

keywords = "Fuzzy control, Modeling, Predictive control, Welding",

author = "Zhang, \{Yu M.\} and Radovan Kovacevic",

note = "Funding Information: Manuscript received July 26, 1996; revised October 28, 1997. This work was supported by the National Science Foundation under Contract DMI-9634735, the Allison Engine Company, Indianapolis, IN, and the Center for Robotics and Manufacturing Systems, University of Kentucky, Lexington, KY.",

year = "1998",

doi = "10.1109/91.705507",

language = "English",

volume = "6",

pages = "389--401",

number = "3",

}

TY - JOUR

T1 - Neurofuzzy model-based predictive control of weld fusion zone geometry

AU - Zhang, Yu M.

AU - Kovacevic, Radovan

N1 - Funding Information: Manuscript received July 26, 1996; revised October 28, 1997. This work was supported by the National Science Foundation under Contract DMI-9634735, the Allison Engine Company, Indianapolis, IN, and the Center for Robotics and Manufacturing Systems, University of Kentucky, Lexington, KY.

PY - 1998

Y1 - 1998

N2 - A closed-loop system is developed to control the weld fusion, which is specified by the top-side and back-side bead widths of the weld pool. Because in many applications only a top-side sensor is allowed, which is attached to and moves with the welding torch, an image processing algorithm and neurofuzzy model have been incorporated to measure and estimate the top-side and back-side bead widths based on an advanced top-side vision sensor. The welding current and speed are selected as the control variables. It is found that the correlation between any output and input depends on the value of another input. This cross coupling implies that a nonlinearity exists in the process being controlled. A neurofuzzy model is used to model this nonlinear dynamic process. Based on the dynamic fuzzy model, a predictive control system has been developed to control the welding process. Experiments confirmed that the developed control system is effective in achieving the desired fusion state despite the different disturbances.

AB - A closed-loop system is developed to control the weld fusion, which is specified by the top-side and back-side bead widths of the weld pool. Because in many applications only a top-side sensor is allowed, which is attached to and moves with the welding torch, an image processing algorithm and neurofuzzy model have been incorporated to measure and estimate the top-side and back-side bead widths based on an advanced top-side vision sensor. The welding current and speed are selected as the control variables. It is found that the correlation between any output and input depends on the value of another input. This cross coupling implies that a nonlinearity exists in the process being controlled. A neurofuzzy model is used to model this nonlinear dynamic process. Based on the dynamic fuzzy model, a predictive control system has been developed to control the welding process. Experiments confirmed that the developed control system is effective in achieving the desired fusion state despite the different disturbances.

KW - Fuzzy control

KW - Modeling

KW - Predictive control

KW - Welding

UR - https://www.scopus.com/pages/publications/0032140108

UR - https://www.scopus.com/pages/publications/0032140108#tab=citedBy

U2 - 10.1109/91.705507

DO - 10.1109/91.705507

M3 - Article

AN - SCOPUS:0032140108

SN - 1063-6706

VL - 6

SP - 389

EP - 401

JO - IEEE Transactions on Fuzzy Systems

JF - IEEE Transactions on Fuzzy Systems

IS - 3

ER -

Neurofuzzy model-based predictive control of weld fusion zone geometry

Resumen

Nota bibliográfica

Financiación

ASJC Scopus subject areas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto