Superconducting wires

M. T. Lanagan; R. B. Poeppel; J. P. Singh; D. I.Dos Santos; J. K. Lumpp; U. Balachandran; J. T. Dusek; K. C. Goretta

doi:10.1016/0022-5088(89)90503-1

Superconducting wires

M. T. Lanagan
, R. B. Poeppel
, J. P. Singh
, D. I.Dos Santos
, J. K. Lumpp
, U. Balachandran
, J. T. Dusek
, K. C. Goretta

Electrical and Computer Engineering

Producción científica: Article › revisión exhaustiva

9 Citas (Scopus)

Resumen

The requirement of high critical current density has prompted extensive research on ceramic processing of high T_c superconductors. An overview of wire fabrication techniques and the limitations they impose on component design will be presented. The effects of processing on microstructure and critical current density will also be discussed. Particle alignment has been observed in extruded samples, and is attributed to high shear stresses during plastic forming. Composites of superconductor and silver in several configurations have been made with little deleterious effect on the superconducting properties.

Idioma original	English
Páginas (desde-hasta)	305-312
Número de páginas	8
Publicación	Journal of the Less-Common Metals
Volumen	149
N.º	C
DOI	https://doi.org/10.1016/0022-5088(89)90503-1
Estado	Published - abr 15 1989

Nota bibliográfica

Funding Information:
The work was supported by the U.S. Department of Energy, BES Materials Sciences, under Contract W-31-109-Eng-38, and by the Defense Advanced Research Projects Agency. The authors gratefully acknowledge the assistance of Dr. D. Shi for his critical current density measurements. One of the authors, D.I.S., would like to acknowledge the financial support received from FAPESP (Fundacao de Amparo ti Pesquisa do Estado de S2o Paul0 , Brazil).

Financiación

The work was supported by the U.S. Department of Energy, BES Materials Sciences, under Contract W-31-109-Eng-38, and by the Defense Advanced Research Projects Agency. The authors gratefully acknowledge the assistance of Dr. D. Shi for his critical current density measurements. One of the authors, D.I.S., would like to acknowledge the financial support received from FAPESP (Fundacao de Amparo ti Pesquisa do Estado de S2o Paul0 , Brazil).

Financiadores	Número del financiador
BES-Materials Sciences	W-31-109-Eng-38
Michigan State University-U.S. Department of Energy (MSU-DOE) Plant Research Laboratory
Defense Advanced Research Projects Agency
Fundação de Amparo à Pesquisa do Estado do Amazonas

ASJC Scopus subject areas

General Engineering

Acceder al documento

10.1016/0022-5088(89)90503-1

Otros archivos y enlaces

Citar esto

@article{dbe16b6a5d9044568ffd7e6b0aa35fa9,

title = "Superconducting wires",

abstract = "The requirement of high critical current density has prompted extensive research on ceramic processing of high Tc superconductors. An overview of wire fabrication techniques and the limitations they impose on component design will be presented. The effects of processing on microstructure and critical current density will also be discussed. Particle alignment has been observed in extruded samples, and is attributed to high shear stresses during plastic forming. Composites of superconductor and silver in several configurations have been made with little deleterious effect on the superconducting properties.",

author = "Lanagan, \{M. T.\} and Poeppel, \{R. B.\} and Singh, \{J. P.\} and Santos, \{D. I.Dos\} and Lumpp, \{J. K.\} and U. Balachandran and Dusek, \{J. T.\} and Goretta, \{K. C.\}",

note = "Funding Information: The work was supported by the U.S. Department of Energy, BES Materials Sciences, under Contract W-31-109-Eng-38, and by the Defense Advanced Research Projects Agency. The authors gratefully acknowledge the assistance of Dr. D. Shi for his critical current density measurements. One of the authors, D.I.S., would like to acknowledge the financial support received from FAPESP (Fundacao de Amparo ti Pesquisa do Estado de S2o Paul0 , Brazil).",

year = "1989",

month = apr,

day = "15",

doi = "10.1016/0022-5088(89)90503-1",

language = "English",

volume = "149",

pages = "305--312",

number = "C",

}

TY - JOUR

T1 - Superconducting wires

AU - Lanagan, M. T.

AU - Poeppel, R. B.

AU - Singh, J. P.

AU - Santos, D. I.Dos

AU - Lumpp, J. K.

AU - Balachandran, U.

AU - Dusek, J. T.

AU - Goretta, K. C.

N1 - Funding Information: The work was supported by the U.S. Department of Energy, BES Materials Sciences, under Contract W-31-109-Eng-38, and by the Defense Advanced Research Projects Agency. The authors gratefully acknowledge the assistance of Dr. D. Shi for his critical current density measurements. One of the authors, D.I.S., would like to acknowledge the financial support received from FAPESP (Fundacao de Amparo ti Pesquisa do Estado de S2o Paul0 , Brazil).

PY - 1989/4/15

Y1 - 1989/4/15

N2 - The requirement of high critical current density has prompted extensive research on ceramic processing of high Tc superconductors. An overview of wire fabrication techniques and the limitations they impose on component design will be presented. The effects of processing on microstructure and critical current density will also be discussed. Particle alignment has been observed in extruded samples, and is attributed to high shear stresses during plastic forming. Composites of superconductor and silver in several configurations have been made with little deleterious effect on the superconducting properties.

AB - The requirement of high critical current density has prompted extensive research on ceramic processing of high Tc superconductors. An overview of wire fabrication techniques and the limitations they impose on component design will be presented. The effects of processing on microstructure and critical current density will also be discussed. Particle alignment has been observed in extruded samples, and is attributed to high shear stresses during plastic forming. Composites of superconductor and silver in several configurations have been made with little deleterious effect on the superconducting properties.

UR - https://www.scopus.com/pages/publications/0024645696

UR - https://www.scopus.com/pages/publications/0024645696#tab=citedBy

U2 - 10.1016/0022-5088(89)90503-1

DO - 10.1016/0022-5088(89)90503-1

M3 - Article

AN - SCOPUS:0024645696

SN - 0022-5088

VL - 149

SP - 305

EP - 312

JO - Journal of the Less-Common Metals

JF - Journal of the Less-Common Metals

IS - C

ER -

Superconducting wires

Resumen

Nota bibliográfica

Financiación

ASJC Scopus subject areas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto