Testing of fiberglass composite bridge deck panels

I. Harik; P. Alagusundaramoorthy; R. Siddiqui; R. Lopez-Anido; S. Morton; P. Dutta; B. Shahrooz

Testing of fiberglass composite bridge deck panels

I. Harik
, P. Alagusundaramoorthy
, R. Siddiqui
, R. Lopez-Anido
, S. Morton
, P. Dutta
, B. Shahrooz

Producción científica: Conference contribution › revisión exhaustiva

2 Citas (Scopus)

Resumen

Experimental investigations are carried out on fiberglass composite bridge deck panels under a three-point bending test. A rectangular patch load, which represents the AASHTO standard HS25 truck wheel load, is applied at the center of each panel. The breadth of all panels is 36 in. The depths of the panels are 8.5 in, 9 in, and 9.5in. The span lengths of the panels are 86 in, 120 in and 144 in. The in-plane deformations and out-of-plane deflections are measured using strain gages and linear variable deflection transducers (LVDT). The measured deflections of the panels under service load are compared with allowable deflection limits. The response of the panels under cyclic loading, the load at failure, and the deformability and mode of failure are reported. It is found that the fiberglass composite deck panels satisfy the allowable deflection criteria, and the factor of safety against collapse is greater than 6.5 for all panels.

Idioma original	English
Título de la publicación alojada	Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99
Editores	C S Chen, C A Brebbia, D W Pepper, I Harik, CS Chen, CA Brebbia, DW Pepper, I Harik
Páginas	663-672
Número de páginas	10
Estado	Published - 1999
Evento	Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99 - Las Vegas, United States Duración: jun 1 1999 → jun 1 1999

Conference

Conference	Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99
País/Territorio	United States
Ciudad	Las Vegas
Período	6/1/99 → 6/1/99

ASJC Scopus subject areas

General Earth and Planetary Sciences
General Engineering
General Environmental Science
General Materials Science

Otros archivos y enlaces

Citar esto

Harik, I., Alagusundaramoorthy, P., Siddiqui, R., Lopez-Anido, R., Morton, S., Dutta, P., & Shahrooz, B. (1999). Testing of fiberglass composite bridge deck panels. En C. S. Chen, C. A. Brebbia, D. W. Pepper, I. Harik, CS. Chen, CA. Brebbia, DW. Pepper, & I. Harik (Eds.), Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99 (pp. 663-672)

@inproceedings{1c032fb275424e03bc4afcabcb87d696,

title = "Testing of fiberglass composite bridge deck panels",

abstract = "Experimental investigations are carried out on fiberglass composite bridge deck panels under a three-point bending test. A rectangular patch load, which represents the AASHTO standard HS25 truck wheel load, is applied at the center of each panel. The breadth of all panels is 36 in. The depths of the panels are 8.5 in, 9 in, and 9.5in. The span lengths of the panels are 86 in, 120 in and 144 in. The in-plane deformations and out-of-plane deflections are measured using strain gages and linear variable deflection transducers (LVDT). The measured deflections of the panels under service load are compared with allowable deflection limits. The response of the panels under cyclic loading, the load at failure, and the deformability and mode of failure are reported. It is found that the fiberglass composite deck panels satisfy the allowable deflection criteria, and the factor of safety against collapse is greater than 6.5 for all panels.",

author = "I. Harik and P. Alagusundaramoorthy and R. Siddiqui and R. Lopez-Anido and S. Morton and P. Dutta and B. Shahrooz",

year = "1999",

language = "English",

isbn = "1853126888",

pages = "663--672",

editor = "Chen, \{C S\} and Brebbia, \{C A\} and Pepper, \{D W\} and I Harik and CS Chen and CA Brebbia and DW Pepper and I Harik",

booktitle = "Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99",

note = "Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99 ; Conference date: 01-06-1999 Through 01-06-1999",

}

Harik, I, Alagusundaramoorthy, P, Siddiqui, R, Lopez-Anido, R, Morton, S, Dutta, P & Shahrooz, B 1999, Testing of fiberglass composite bridge deck panels. En CS Chen, CA Brebbia, DW Pepper, I Harik, CS Chen, CA Brebbia, DW Pepper & I Harik (eds.), Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99. pp. 663-672, Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99, Las Vegas, United States, 6/1/99.

Testing of fiberglass composite bridge deck panels. / Harik, I.; Alagusundaramoorthy, P.; Siddiqui, R. et al.
Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99. ed. / C S Chen; C A Brebbia; D W Pepper; I Harik; CS Chen; CA Brebbia; DW Pepper; I Harik. 1999. p. 663-672.

Producción científica: Conference contribution › revisión exhaustiva

TY - GEN

T1 - Testing of fiberglass composite bridge deck panels

AU - Harik, I.

AU - Alagusundaramoorthy, P.

AU - Siddiqui, R.

AU - Lopez-Anido, R.

AU - Morton, S.

AU - Dutta, P.

AU - Shahrooz, B.

PY - 1999

Y1 - 1999

N2 - Experimental investigations are carried out on fiberglass composite bridge deck panels under a three-point bending test. A rectangular patch load, which represents the AASHTO standard HS25 truck wheel load, is applied at the center of each panel. The breadth of all panels is 36 in. The depths of the panels are 8.5 in, 9 in, and 9.5in. The span lengths of the panels are 86 in, 120 in and 144 in. The in-plane deformations and out-of-plane deflections are measured using strain gages and linear variable deflection transducers (LVDT). The measured deflections of the panels under service load are compared with allowable deflection limits. The response of the panels under cyclic loading, the load at failure, and the deformability and mode of failure are reported. It is found that the fiberglass composite deck panels satisfy the allowable deflection criteria, and the factor of safety against collapse is greater than 6.5 for all panels.

AB - Experimental investigations are carried out on fiberglass composite bridge deck panels under a three-point bending test. A rectangular patch load, which represents the AASHTO standard HS25 truck wheel load, is applied at the center of each panel. The breadth of all panels is 36 in. The depths of the panels are 8.5 in, 9 in, and 9.5in. The span lengths of the panels are 86 in, 120 in and 144 in. The in-plane deformations and out-of-plane deflections are measured using strain gages and linear variable deflection transducers (LVDT). The measured deflections of the panels under service load are compared with allowable deflection limits. The response of the panels under cyclic loading, the load at failure, and the deformability and mode of failure are reported. It is found that the fiberglass composite deck panels satisfy the allowable deflection criteria, and the factor of safety against collapse is greater than 6.5 for all panels.

UR - https://www.scopus.com/pages/publications/0033492626

UR - https://www.scopus.com/pages/publications/0033492626#tab=citedBy

M3 - Conference contribution

AN - SCOPUS:0033492626

SN - 1853126888

SP - 663

EP - 672

BT - Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99

A2 - Chen, C S

A2 - Brebbia, C A

A2 - Pepper, D W

A2 - Harik, I

A2 - Chen, CS

A2 - Brebbia, CA

A2 - Pepper, DW

A2 - Harik, I

T2 - Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99

Y2 - 1 June 1999 through 1 June 1999

ER -

Harik I, Alagusundaramoorthy P, Siddiqui R, Lopez-Anido R, Morton S, Dutta P et al. Testing of fiberglass composite bridge deck panels. En Chen CS, Brebbia CA, Pepper DW, Harik I, Chen CS, Brebbia CA, Pepper DW, Harik I, editores, Boundary Element Technology XIII. Proceedings of the 1999 Thirteenth International Conference on Boundary Element Technology, BETECH '99. 1999. p. 663-672

Testing of fiberglass composite bridge deck panels

Resumen

Conference

ASJC Scopus subject areas

Otros archivos y enlaces

Huella

Citar esto